Product Description

No tangle 1.75mm PLA+ filament

Diameter: 1.75+/-0.03mm. The filament is automatically winded by advanced machine. It can help to reduce the tangle issue and maintain the 3d printers with consistent extrustion.

Toughness Up

Enhanced filament material toughness, this PLA+ is less prone to brittle than ordinary pla filament.

Smooth Printing

Smooth extrustion, good printing stability, low shrinkage, no warping, no cracking. Strong adhesion. Suitable for large size printing.

Great prints

The prints is blue in the daylight. But after sufficient sunlight or UV light expose, it will have glow in the dark effect.

FAQ:

Stringing or oozing occurs when marginal lines of plastic are left behind or in between the objects while the nozzle moves to another point due to incorrect retraction settings, a loose belt, printing temperature set too high, and/or poor quality filament being used.

Solutions include the following:

1. Running a basic retraction test to adjust the optimum retraction value. If retraction is enabled, the filament will be pulled back into the nozzle to act as a countermeasure against oozing. The optimum speed is 6000 mm/min (20–100 mm/s).

2. Ensure that all tension belts are tightened.

3. Lower the printing temperature by 5 to 10 ◦C.

4. Post-process the parts to remove strings by using a heat gun. For PLA and ABS parts, set the heat gun at 200 ◦C to melt the strings and the printed object should remain undamaged.

PLA+ blue with glow in the dark effect-This PLA+ 3d printer filament contains phosphorescent materials. it’s blue in the daylight. Under sufficient time expose to the sunlight or UV light, the filament shall absorbed light energy. It will have bright luminous effect in the dark environment. Please note that too long light exposure time will damage the PLA+ material.
Specifications-Diameter: 1.75+/-0.03mm, N.W.:1kg (2.2lbs), G.W.:1.3kg (2.86lbs). Filament Length: 330-335m. Recommend printing settings: Nozzle Temp: 190-210°C. Bed Temp: 40-60°C. Printing Speed: 30-70mm/s.
High Quality-dikale PLA pro plus 3d printing filament is nicely automatically winded by machine to reduce tangle rate. This filament is stronger than pure PLA filament. Not brittle and easy to print. And each product has quanlity control before they are shipped out.
Widely Compatibility-Dikale 1.75mm pla+ filament luminous color is suitable and compatible with most FDM 3D printer. Such as Creality Ender 3 , Ender 3 Pro, Monoprice Mini Delta, Flashforge creator, QIDI TECH X-plus, LONGER LK4 3D printer and more
Trustworthy Merchant-Dikale PLA+ 1.75mm 3D Printer Filament complete drying for 24 hours before packaging and vacuumed sealed, which can effectively protect the PLA+ filament from moisture. To provide you a smooth and stable printing experience. If you have some questions, please send email to us , we will be happy to help you