Dikale PLA+ 3D Printer Filament 1.75mm No Tangle, Neatly Wound Filament Net Weight 250g Spool, PLA Pro Plus,Silk Silver

dikale 3D printer filament has five advantages:

1. High purity, non toxic and low odor.

2. High precision, dimensional tolerance ± 0.03mm.

3. High strength, better toughless, low shrinkage.

4. Minimal warping, no print head clogging.

5. Compatible with most of FDM 3d printers.

Recommend:

PLA+ Nozzle Temperture: 190-220 °C.

PETG Nozzle Temperature: 210-230°C. No Fan.

Hot Bed Temperature: 55-75.

First Layer Printing Speed: 20-25mm/s.

Normal Printing Speed: 30-60mm/s.

FAQ:

Stringing or oozing occurs when marginal lines of plastic are left behind or in between the objects while the nozzle moves to another point due to incorrect retraction settings, a loose belt, printing temperature set too high, and/or poor quality filament being used.

Solutions include the following:

1. Running a basic retraction test to adjust the optimum retraction value. If retraction is enabled, the filament will be pulled back into the nozzle to act as a countermeasure against oozing. The optimum speed is 6000 mm/min (20–100 mm/s).

2. Ensure that all tension belts are tightened.

3. Lower the printing temperature by 5 to 10 ◦C.

4. Post-process the parts to remove strings by using a heat gun. For PLA and ABS parts, set the heat gun at 200 ◦C to melt the strings and the printed object should remain undamaged.

Strengthen Adhesion & Nice Color: dikale 1.75mm PLA+ filaments layer adhesion has been strengthened. Good tensile strength, low ductility retraction, high toughness and low weight. Supply you low shrinkage and good layer bonding filaments
Easy to print: dikale 250g PLA+ filaments are clog free and bubble free. Advanced CCD diameter measuring and self-adaptive control system in the manufacturing to guarantee its accuracy and consistency. High toughness, printing without warping and bubble, good molding effect, smooth and accurate color
Settings: Recommended Printing speed: 30-70mm/s. Nozzle temp:190-230°C. Heat Bed 50-70°C. Filament net weight: 250g, Item Weight: 350g, Length: 81-84m/275ft
Package: dikale PLA+ 1.75mm 3D Printer Filament complete drying before packaging and vacuumed sealed, which can effectively protect the PLA+ filament from moisture. To provide you a smooth and stable printing experience
Wide Compatibility: dikale 1.75mm pla+ filament 250g spool is suitable for many FDM 3D printer and 3D printing pen. Such as Creality Ender 3 , Ender 3 Pro, Monoprice Mini Delta, Flashforge creator, Bambu lab p1p