This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.

eSUN 3D Printer Filament: ABS+
Size: 3mm

Extrusion Temperature Range: 220 Celsius to 260 Celsius
Bed Temp: 100 Celsius to 110 Celsius

ABS+ Advantages:

Much less warp than ABS. Typical ABS has over 0.8% shrinkage rate. ABS+ is less than 0.4%
High rigidity.
Much better layer bonding and details.
Not fully dissolvable in acetone. For acetone post-processing applications please still use our regular ABS. our regular ABS also has less warp than other brand ABS.

Colors offered:
Black
White
Silver
Natural
Red
Orange
Yellow
Gold
Peak Green/Light Green
Gray
Blue
Light Blue

Search “eSUN ABS” to find other colors.

Note that ABS+ is not as responsive as regular ABS with acetone bath. Choose ABS or ABS+ according to your preferences.

READ THIS before purchasing: This is 2.85mm diameter filament. This is NOT 1.75mm diameter filament. Most 3D printers only work with 1.75mm filaments. Make sure this 2.85mm filament is for your printer before purchasing. Too many returns due to wrong size purchased.
eSUN ABS+ 3D Printer Filament Vacuumed Sealed With Desiccant
3mm Filament Diameter (Actual Diameter 2.85mm. Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 220C – 260C
Spool Diameter: 8″ – Spool Width: 2.50″ – Spool Hub Hole Diameter: 2.05″ – Inner Circle Diameter: 3.5″