Tired of fragile 3D printed parts? Armadillo 3D printing filament is a perfect alternative to some of the most common rigid materials on the market. Armadillo filament is a high performing rigid material, providing 90% higher abrasion resistance than nylon materials. Its toughness ratings are superior to commonly used materials, 86 times greater than that of ABS. It is an excellent material to use for bridging, with virtually no warping issues. When you need a rigid product that can withstand wear and tear, the Armadillo resistance to fracturing makes it a perfect replacement. Suggested Applications: braces, fasteners, gears and protective covers. KEY FEATURES: Shore Hardness = 75D Excellent bridging capabilities and virtually no warping Abrasion resistance 84% better than PLA and 60% better than ABS Chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and Freon Consistent diameter and material properties providing reliable, high quality prints No heated bed required. Build platform requires same prep as PLA REACH and RoHS 2002/95/EC Directive compliant PRINTING GUIDELINES: Extruder Temperature: 220°C – 230°C Platform Temperature: Room temperature – 45°C Glue and/or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 15-20 mm/ sec (900-1800 mm/ min) Infill speeds: 45-60 mm/ sec (2700-3600 mm/ min) Layer 2+ use cooling fan if available.

Made in United States
Package weight :1.25 lbs
Package height :23.6 cm
Package length :6.4 cm
Package width :21.5 cm